Part Number GA_SM 08/18 41
Section 6 Control
NETWORK CONNECTION
Connected to:
Back Connection Setup
Ethernet: 10.214.25.62
WiFi: SSID: net_name
!
Configuration Screen\Network Connection
• Ethernet: will display local area network name and icon
if it is connected.
• WiFi: will display the WiFi network name and signal
strength if it is connected.
• Ethernet and WiFi both offer access to a IP Address
Setup screen. Select the cog icon.
• Manage the networks by selecting Set Up Connection.
SET UP CONNECTION
Back Add a Network
WBT_Enterprise
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
Manage Networks
Freds_WiFi
[WPA-PSK-CCMP][WPA2-PSK-CCMP][WPS][ESS]
WBT_Guest
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
Freds_WiFi
[WPA-PSK-TKIP=CCMP][WPA2-PSK-TKIP+CCMP][ESS]
!
Configuration Screen\Network Connection
\Set Up Connection
• Screen will list up to eight networks, their name, type of
security, and signal strength using an icon.
• Use the scroll bar on the right of the screen to see
additional networks.
• Select a listed network and the display will navigate to
the complete that network’s setup.
• Select the words on the screen to add a network.
To Next Page
Loading...
Need help?
General
