Dell 1815dn - All-in-one Laser Printer User Manual

Loading Print Media 45
Depending on the paper type you are using, keep the following loading method:
• Envelopes: load them with the flap side down and with the stamp area on the top left side.
• Transparencies: load them with the print side up and the top with the adhesive strip entering the
printer first.
• Labels: load them with the print size up and top short edge entering the printer first.
• Preprinted paper: load with the design face up, top edge toward the printer.
• Card stock: load them with the print side up and the short edge entering the printer first.
• Preprinted paper: the printed side should be facing down with an uncurled edge toward the
printer.
4 Squeeze the width guide and adjust it to the width of the print material. Do not force too much, or the
paper will be bent, which will result in a paper jam or skew.
5 After loading paper, set the paper type and size for the bypass tray. See "Setting the Paper Size and
Type" on page 47 for copying and faxing or Paper Tab on the
User’s Guide for PC-printing.
NOTE: The settings made from the printer driver override the settings on the operator panel.

Dell 1815dn - All-in-one Laser Printer Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Fax Transmission Speed	33.6 Kbps
Monthly Duty Cycle	Up to 15, 000 pages
Connectivity	USB 2.0, Ethernet
Duplex Printing	Automatic
Functions	Print, Copy, Scan, Fax
First Page Out Time	Less than 8.5 seconds
Memory	32 MB
Paper Handling	250-sheet input tray, 50-sheet multi-purpose tray
Media Size	A4, A5, B5
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Linux, Mac OS