Replacing the display bezel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
Align and place the display bezel onto the display assembly and snap it into place in the following order: Bottom (Alienware
logo)->Right->Left->Top (camera).
Post-requisites
1. Replace the display assembly.
2. Replace the wireless card.
3. Replace the base cover.
35
Replacing the display bezel 73
To Next Page
Loading...
