Steps
1. Remove the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.
2. Slide and lift the solid-state drive/Intel Optane from the M.2 card slot on the system board.
Identifier
GUID-F592144F-AFDC-4277-8344-374DDB56523F
Status Released
Installing the solid-state drive/Intel Optane
Prerequisites
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the solid-state drive/Intel Optane and provides a visual representation of the installation
procedure.
32
Removing and installing components
To Next Page
Loading...
