Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Identifier GUID-CA447DD8-2E2F-41C3-AB86-5E82BB744D6A
Status Released
Processor
Identifier GUID-13F3DC8B-07C4-45A5-A2E8-F3C3F3F64311
Status Released
Removing the processor
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the processor fan and heat-sink assembly.
WARNING: The processor might still be hot after the computer is shut down. Allow the processor to cool down before
removing it.
About this task
The following images indicate the location of the processor and provides a visual representation of the removal procedure.
Removing and installing components
45
To Next Page
Loading...
