2. Using the tab on the left-side cover, slide and lift the left-side cover off the chassis.
Identifier GUID-5D94D79F-7013-425B-8BFA-518E417B56EB
Status Released
Installing the left-side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the left-side cover and provides a visual representation of the installation procedure.
Steps
1. Align the tabs on the left-side cover with the slots on the chassis, and slide it towards the front of the computer.
2. Tighten the two captive screws that secure the left-side cover to the chassis.
Next steps
1. Follow the procedure in After working inside your computer.
14
Removing and installing components
To Next Page
Loading...
