Steps
1. Lay the computer on the right side.
2. Using your finger, push the coin-cell battery-release lever on the coin-cell battery socket to release the coin-cell battery out of the
socket.
3. Remove the coin-cell battery.
Identifier
GUID-15487FD4-FEAB-4D7A-B067-E7B5DEE0C427
Status Released
Installing the coin-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the coin-cell battery and provides a visual representation of the installation procedure.
Removing and installing components
37
To Next Page
Loading...
