Identifier GUID-38F51F10-D0BE-4003-968E-FCD44D96B684
Status Released
VR heat sink
Identifier GUID-D15B0A27-8433-46B8-B8F1-DA86C922E4AB
Status Released
Removing the VR heat sink
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
NOTE: The VR heat sink is shipped as a separate unit and it does not ship along with the system board. Ensure to
replace the VR heat sink from old system board to the new system board.
2. Remove the left-side cover.
About this task
The following images indicate the location of the VR heat sink and provides a visual representation of the removal procedure.
Steps
1. Loosen the captive screws that secure the VR heat sink to the system board.
48
Removing and installing components
To Next Page
Loading...
