2. Locate the graphics card (PCI-Express).
3. Disconnect the power cables from the graphics card and remove them from the routing guides on the graphics -card support bracket.
NOTE: This step is applicable only for computers that are shipped with a graphics-card support bracket.
4.
Push the securing tabs on the graphics-card support bracket and rotate to remove it off the chassis.
5. Lift the pull tab to open the PCIE door.
6. Push and hold the securing tab on the graphics-card slot and lift the graphics card from the graphics-card slot.
NOTE: To remove the NVIDIA GeForce RTX 2080 graphics card, lift and rotate the graphics card.
Identifier GUID-EA269A94-9752-4E9A-BED6-B00D1E7B430C
Status Released
Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provides a visual representation of the installation procedure.
Removing and installing components 35
To Next Page
Loading...
