Dell G5 5090 - LED Daughter Board; Removing the LED Daughter Board; Installing the LED Daughter Board

Identifier GUID-3AC1585B-34E2-40B4-9C26-E98CDE685DB3
Status Released
LED daughter board
Identifier GUID-CA0C60A7-925F-4C6A-81D8-005A32B0403C
Status Released
Removing the LED daughter board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the LED daughter board and provides a visual representation of the removal procedure.
Steps
1. Disconnect the light-bar cable and the front-LED cable from their respective connectors on the LED daughter board.
2. Remove the screw (M2x3) that secures the LED daughter board to the system board.
3. Slide and remove the LED daughter board off the system board.
Identifier
GUID-C47D51F9-CA07-4CB8-AAC7-BC4786BCA842
Status Released
Installing the LED daughter board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
50
Removing and installing components