3 Connect the USB 3.1 Type-C port cable to the system board.
4 Connect the 2.5-inch hard-drive cable to the system board.
5 Connect the 3.5-inch hard-drive data cable to the system board.
6 Connect the optical-drive power cable to the system board.
7 Connect the USB 3.1 (Type-C) cable to the system board.
8 Connect the USB 2.0 cable to the system board.
9 Press the securing clip and disconnect the power-supply unit cable from the system board.
10 Connect the light-bar cable to the system board.
11 Press the securing clip and disconnect the power-button board cable from the system board.
12 Connect the processor-power cable to the system board.
13 Connect the light-bar cable to the system board
14 Connect the fan cable to the system board.
15 Connect the front-audio cable to the system board.
16 Place the computer in an upright position.
Post-requisites
1 Replace the processor.
2 Replace the processor-cooling assembly or processor fan.
3 Replace the graphics card.
4 Replace the wireless card.
5 Replace the solid-state drive.
6 Replace the memory module.
7 Replace the right-side cover.
108
Replacing the system board
To Next Page
Loading...
