Removing the logo board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the right-side cover.
2 Remove the front cover.
Procedure
1 Disconnect the logo-board cable from the logo board.
2 Disconnect the two screws (M3x5) that secures the logo board to the chassis.
3 Remove the logo board from the chassis.
51
Removing the logo board 87
To Next Page
Loading...
