Removing the light bar
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the right-side cover.
Procedure
1 Disconnect the light bar cable from its connector on the chassis.
2 Remove the screw (M3x5) that secures the light bar to the chassis.
3 Slide and remove the light bar from the chassis.
9
18 Removing the light bar
To Next Page
Loading...
