Removing the antennas
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the right-side cover.
2 Remove the wireless card.
Procedure
NOTE
: Note the routing of white antenna cable and black antenna cable on the chassis while removing them so that you can
replace them correctly.
1 Lay the computer on the left side and remove the screw (M3x5) that secures the antenna cables to the chassis.
2 Peel the tape that secures the antenna cables to the chassis.
3 Remove the screw (M3x5) and the tape that secures the antenna cables to the chassis.
4 Remove the antenna cables from the routing guide on the chassis.
45
Removing the antennas 77