Replacing the logo board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the logo board with the slot on the chassis.
2 Replace the two screws (M3x5) that secures the logo board to the chassis.
3 Connect the logo-board cable to the logo board.
Post-requisites
1 Replace the front cover.
2 Replace the right-side cover.
52
88 Replacing the logo board
To Next Page
Loading...
