Removing the front-panel light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1 Remove the right-side cover.
2 Remove the front cover.
Procedure
1 Lay the computer on the left side and disconnect the front panel light-board cable from the system board.
2 Remove the front panel light-board cable from the routing guides on the chassis.
3 Press the tab and release it form the routing guide on the chassis and disconnect the front light bar cable from the logo board.
4 Remove the screw (M3x5) that secures the front panel light-board to the chassis.
5 Remove the front panel light-board from the chassis.
49
Removing the front-panel light board 83
To Next Page
Loading...
