Replacing the front bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the front bezel to the slots on the chassis.
2 Replace the 11 screws (M3x5) that secure the front bezel to the chassis and place the computer with the side-chassis facing up.
Post-requisites
1 Replace the top cover.
2 Replace the light bar.
3 Replace the front-panel light board.
4 Replace the logo board.
5 Replace the front I/O panel.
6 Replace the slim optical drive
7 Replace the front cover.
58
Replacing the front bezel 99