Replacing the bottom cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Tilt the computer towards the front until the base is facing up.
2 Align the tabs on the bottom cover with the slots on the chassis and snap the bottom cover to lock it in place.
3 Replace the three screws (M3x5) that secure the bottom cover to the chassis.
4 Place the computer in an upright position.
Post-requisites
Replace the right-side cover.
36
62 Replacing the bottom cover
To Next Page
Loading...
