Removing the processor fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
Remove the right-side cover.
Procedure
NOTE
: Applicable only for computers shipped with processor fan.
1 Lay the computer on the left side and disconnect the processor-fan cable from the system board.
2 Lift the release-lever on the heat sink.
3 Press the lever and release it from the securing tabs on both sides of the processor.
4 Lift the processor fan and heat-sink assembly o the system board.
39
Removing the processor fan 67