Replacing the top cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align the tabs on the top cover with the slots on the chassis and slide the top cover towards the front of the chassis and secure the
top cover in place.
2 Replace the screw (M3x5) that secures the top cover to the chassis.
3 Place the computer in an upright position.
Post-requisites
Replace the right-side cover.
32
56 Replacing the top cover
To Next Page
Loading...
