Replacing the slim optical drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1 Align and snap the slim optical-drive bezel to the optical drive.
2 Place the slim optical-drive assembly on the slim optical-drive bracket and snap the slim optical-drive assembly in place.
3 Slide the slim optical-drive assembly into the slim optical-drive bay through the front of the computer.
4 Connect the data cable and power cable to the optical drive.
54
Replacing the slim optical drive 91
To Next Page
Loading...
