Mini Tower Computer Parts 191
6
Insert the new battery into the socket with the side labeled "+" facing up,
then snap the battery into place.
7
Replace the computer cover (see "Replacing the Computer Cover" on
page 207).
NOTICE: To connect a network cable, first plug the cable into the network device
and then plug it into the computer.
8
Connect your computer and devices to electrical outlets, and then turn
them on.
9
Enter system setup (see "Entering System Setup" on page 79) and restore
the settings you recorded in step 1. Then go to the
Maintenance
section
and clear the low battery and other errors associated with the battery
replacement in the
Event Log
.
10
Properly dispose of the old battery.
See the
Product Information Guide
for battery disposal information.
1 system battery 2 positive side of battery connector
3 battery socket tab 4 battery socket
2
4
1
3
To Next Page
Loading...
