90 System Setup
For example, if you are booting to a USB memory key, highlight
USB
Device
and press <Enter>.
NOTE: To boot to a USB device, the device must be bootable. To make sure
your device is bootable, check the device documentation.
Changing Boot Sequence for Future Boots
1
Enter system setup (see "Entering System Setup" on page 79).
2
Use the arrow keys to highlight the
Boot Sequence
menu option and press
<Enter> to access the pop-up menu.
NOTE: Write down your current boot sequence in case you want to restore it.
3
Press the up- and down-arrow keys to move through the list of devices.
4
Press the spacebar to enable or disable a device. (Enabled devices have a
checkmark.)
5
Press <Shift><Up Arrow> or <Shift><Down Arrow> to move a
selected device up or down the list.
To Next Page
Loading...
