Dell P25T - Removing the Display Assembly; Prerequisites; Procedure

Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-0479C746-3F06-40E0-B04B-CE1F253F7500
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the wireless card.
Identifier GUID-6D70A1DB-A22B-4AC9-A0DF-DF08B0C00455
Status Released
Procedure
1 Disconnect the speaker cable from the system board.
2 Remove the antenna cable from the routing guide on the right speaker.
3 Peel o the tapes from the antenna cables and coin-cell battery.
4 Peel o the tape from the sensor-board cable.
56