Dell P25T - Removing the Coin-Cell Battery; Prerequisites; Procedure

Identifier GUID-30EEBC49-DE3E-4C3F-8226-86CE5F32F388
Status Released
Removing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program’s
settings to default. It is recommended that you note the BIOS setup
program’s settings before removing the coin-cell battery.
Identifier GUID-0363CC1F-DCE2-4E00-915E-6EE1627F6397
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Identifier GUID-D7CE4C8F-BB9B-4960-9CD9-BE8C898C7ACE
Status Released
Procedure
1 Open the latch and disconnect the I/O-board cable from the system board.
44