Dell P25T - Procedure

Identifier GUID-6FD32244-34F4-4843-983D-B6C14903EFC9
Status Released
Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-97E7DB96-B844-44A0-B95E-9DA842737DFC
Status Released
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 Align the display panel on the display-back cover and snap the display panel into
place.
2 Route the display cable through the routing guide on the left hinge.
3 Route the sensor-board cable through the routing guide on the right hinge.
Identifier GUID-C57D6C30-96D6-4851-BA14-4C2055142A75
Status Released
Post-requisites
1 Replace the display assembly.
2 Replace the wireless card.
3 Replace the battery.
4 Replace the base cover.
81