Dell PowerConnect 8024 - Configured Ipv6 Routes

1082 Configuring IPv6 Routing
Configured IPv6 Routes
Use the Configured IPv6 Routes page to display selected IPv6 routes.
To display the page, click Routing
→ IPv6 → IPv6 Routes → Configured
IPv6 Routes in the navigation panel.
Figure 38-10. Configured IPv6 Routes
To remove a configured route, select the check box in the Delete column of
the route to remove, and click Apply.
NOTE: For a static reject route, the next hop interface value is Null0. Packets to
the network address specified in static reject routes are intentionally dropped.