Dell PowerConnect 8024 - Page 482

482 Configuring Port and System Security
5 To re-authenticate immediately, check Reauthenticate Now for all ports to
be re-authenticated.
6 Click Apply .
The authentication process is restarted on the specified ports (either
immediately or periodically).
Changing Administrative Port Control
To change the administrative port control:
1
Open the Dot1x Authentication page.
2 Click Show All .
The
Dot1x Authentication Tabl e displays.
3 Scroll to the right side of the table and select the Edit check box for each
port to configure. Change
Admin Port Control to Authorized ,
Unauthorized , or Automode as needed for chosen ports. Only MAC-
Based
and Automode actually use 802.1X to authenticate. Authorized and
Unauthorized are manual overrides.
4 Click Apply .
Admin Port Control is updated for the specified ports, and the device is
updated.
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the Authenticated Users page, click Switching
→ Network
Security
→ Authenticated Users in the navigation panel.