Need help?Do you have a question about the Dell PowerEdge R750xa and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Management | iDRAC9 with Lifecycle Controller |
| Processor | Intel Xeon Scalable processors |
| Memory | DDR4 |
| Maximum RAM | Up to 1TB with RDIMM |
| Storage | Up to 24 x 2.5" or 12 x 3.5" drives (SAS/SATA/NVMe) |
| GPU Support | Up to 3 double-width GPUs (300W each) |
| Network | 1 x 1GbE, 10GbE, 25GbE, 40GbE OCP 3.0 card (optional) |
| Power Supply | Dual, hot-plug, redundant power supplies |
| Operating System Support | Microsoft Windows Server |
Describes the front panel components and indicators of the system.
Details the components and indicators on the left control panel.
Describes the components and indicators on the right control panel.
Details the ports and connectors available on the rear of the system.
Illustrates the internal components of the system.
Explains how to find the system's service tag for identification.
Describes the location and content of the system information label.
Provides guidance on selecting compatible rack rails for system installation.
Outlines the basic steps for unpacking and setting up the system.
Details how to configure the integrated Dell Remote Access Controller (iDRAC).
Lists methods for configuring the iDRAC IP address for network access.
Explains the different methods for accessing the iDRAC Web User Interface.
Provides links to resources for installing the operating system on the server.
Lists options and links for downloading system firmware.
Provides options for downloading and installing operating system drivers.
Guides on how to download and install the latest system BIOS, drivers, and firmware.
Lists the essential components required for the system to power on.
Explains how the system validates its configuration and reports errors.
Describes common error messages related to system configuration checks.
Provides essential safety guidelines and warnings before handling system components.
Outlines prerequisites and steps to take before performing internal system maintenance.
Details the final steps after completing internal system maintenance.
Lists the necessary tools for component removal and installation procedures.
Covers removal and installation of the optional front bezel.
Instructions for removing and installing the main system cover.
Covers removal and installation of the drive backplane cover.
Instructions for removing and installing the system's air shroud.
Guides for removing and installing cooling fan cage and individual fans.
Instructions for removing and installing the side wall bracket.
Procedures for removing/installing drive blanks, carriers, and drives.
Covers removal and installation of the rear mounting front PERC module.
Details on the drive backplane and its removal/installation.
Illustrates cable routing for front GPU power connections.
Guidelines and procedures for installing system memory modules (DIMMs).
Procedures for removing and installing processors, heat sinks, and cooling modules.
Covers installation guidelines, removal, and installation of risers and cards.
Instructions for removing and installing the optional serial COM port.
Instructions for removing and installing the VGA port for liquid cooling.
Procedures for removing and installing the IDSDM module.
Instructions for removing and installing MicroSD cards.
Covers removal/installation of BOSS S2 module, blanks, and carriers.
Instructions for safely replacing the system's internal battery.
Procedures for removing and installing the internal USB card.
Instructions for removing and installing the chassis intrusion switch module.
Procedures for removing and installing the OCP card.
Covers PSU features, removal/installation of PSUs and adapters/blanks.
Guidance on upgrading, removing, installing, and initializing the TPM.
Detailed instructions for removing and installing the system board.
Steps to remove and install the LAN on Motherboard (LOM) and rear I/O board.
Instructions for removing and installing the left and right control panels.
Lists components included in the BOSS S2 module upgrade kit.
Details components included in various GPU upgrade kits.
Describes the contents of the IDSDM upgrade kit.
Lists the components included in the internal USB card kit.
Lists the components included in the serial COM port kit.
Lists the components included in the VGA port kit.
Identifies and describes the connectors on the system board.
Explains the settings for system board jumpers.
Procedures to disable system or setup passwords using jumpers.
Explains the system status LED indicators and their meanings.
Describes the system health and ID indicator lights.
Explains the indicator codes for the iDRAC Quick Sync 2 feature.
Explains the indicator codes for the iDRAC Direct port.
Information about the LCD panel, its features, and status.
How to navigate and view the system's Home screen on the LCD.
Information on accessing and navigating the system's Setup menu.
Information on accessing and navigating the system's View menu.
Explains the indicator codes for the Network Interface Card (NIC).
Explains the status indicator codes for AC and DC power supply units.
Explains the status indicator codes for system drives.
Guide on running system diagnostics for troubleshooting.
Information on product recycling and disposal services.
Provides steps and resources for contacting Dell support.
How to use the Quick Resource Locator (QRL) for system information.
Information about Dell's automated support service, SupportAssist.
Links to further documentation and resources for the system.
To Next Page