Figure 38. Installing the side wall bracket
Next steps
1. Install the cooling fan cage assembly.
2. If removed, install the air shroud.
3. If required, install the drive backplane cover.
4. Follow the procedure listed in the After working inside your system.
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. If installed, remove the front bezel.
CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Installing and removing system components
45
To Next Page
Loading...
