Dell PowerEdge R7615 - Page 120

Figure 82. 16 x 2.5 inch SAS/SATA Low Profile with FPERC12
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 77. 16 x 2.5 inch SAS/SATA Low Profile with FPERC12
Order From To
1 SIG_PWR_2 (system board power
connector)
BP_PWR_1 (backplane power
connector)
2 SIG_PWR_1 (system board power
connector)
BP_PWR_1 (backplane power
connector)
3 SL5_CPU1_PB2 (signal connector on
system board)
DST_PB1 (backplane signal connector)
4 SL6_CPU1_PA4 (signal connector on
system board)
DST_PA1 (backplane signal connector)
5 SL8_CPU1_PA4 (signal connector on
system board)
DST_PB2 (backplane signal connector)
6 SL7_CPU1_PA4 (signal connector on
system board)
DST_PA2 (backplane signal connector)
7 SL4_CPU_1_PB1 (signal connector on
system board)
DST_PB2 (backplane signal connector)
8 SL2_CPU1_PB4 (signal connector on
system board)
DST_PA2 (backplane signal connector)
9 SL1_CPU1_PA4 (signal connector on
system board)
DST_PA1 (backplane signal connector)
10 SL3_CPU1_PA1 (signal connector on
system board)
DST_PB1 (backplane signal connector)
120 Installing and removing system components