Figure 103. Installing the system board
1
tabs on the system board (2) 2 slots on the chassis
3 release pin 4 metal bracket
5 memory riser guide
Next steps
1 Install the following:
a Power supply unit bay (2) with power distribution board (2)
b Power supply units
c NDC riser
d Expansion card risers, expansion card, integrated storage controller
e Processors and heat sinks
f Processor blank and heat sink blank
g Fan tray
h Memory riser and fan cage
i Memory risers (8)
j Cooling fans (6)
k Cable management tray
Installing and removing system components
175
To Next Page
Loading...
