Dell PowerEdge R930 - Serial Connector; Internal Dual Sd Module; Video Specifications; Environmental Specifications

Serial connector
The serial connector connects a serial device to the system. The PowerEdge R930 system supports one serial connector on the back
panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R930 system supports two 15-
pin VGA ports one each on the front and back panels.
Internal Dual SD Module
The PowerEdge R930 system supports two optional ash memory card slots with an internal dual SD module.
NOTE: One card slot is dedicated for redundancy.
Video specications
The PowerEdge R930 system supports Matrox G200 graphics card with 16 MB capacity.
Table 19. Supported video resolution options
Resolution Refresh rate (Hz) Color depth (bits)
640 x 480 60, 70 8, 16, 32
800 x 600 60, 75, 85 8, 16, 32
1024 x 768 60, 75, 85 8, 16, 32
1152 x 864 60, 75, 85 8, 16, 32
1280 x 1024 60, 75 8, 16, 32
1440 x 900 60 8, 16, 32
Environmental specications
NOTE
: For additional information about environmental measurements for specic system congurations, see Dell.com/
environmental_datasheets.
Table 20. Temperature specications
Temperature Specications
Storage –40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Maximum temperature gradient (operating and storage) 20°C/h (68°F/h)
28 Technical specications