Dell PowerEdge R930 - Jumpers and Connectors

Jumpers and connectors
Topics:
• System board jumper settings
• System board connectors
• Disabling a forgotten password
System board jumper settings
For information about resetting the password jumper to disable a password, see Disabling a forgotten password.
Table 39. System board jumper settings
Jumper Setting Description
PWRD_EN The password reset feature is enabled (pins 2–4).
The password reset feature is disabled (pins 4–6). The iDRAC local
access is unlocked at the next AC power cycle.
NVRAM_CLR The conguration settings are retained at the next system boot
(pins 3–5).
The conguration settings are cleared at system boot (pins 1–3).
9
192 Jumpers and connectors