Dell Precision 490 Desktop User Manual


Memory odd/even logic failure at address, read value expecting value — 

Memory write/read failure at address, read value expecting value — 

MemorysizeinCMOSinvalid— 
See Memory Problems.

Nobootdeviceavailable— 
l If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive.
l If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a
boot device.
l Enter system setup and ensure that the boot sequence information is correct (see System Setup).

No boot sector on hard-diskdrive— Enter system setup and ensure that the computer configuration information for the hard drive is
correct (see System Setup).
If the message continues to appear after you ensure that the information in system setup is correct, see your operating system
documentation for reinstallation information.

Notimertickinterrupt— Run the Dell Diagnostics (see Dell Diagnostics).

Non-systemdiskordiskerror— Replace the floppy disk with one that has a bootable operating system or remove the floppy disk from
drive A and restart the computer.

Notabootdiskette— Insert bootable media and restart your computer.

Notenoughmemoryorresources.Closesomeprogramsandtryagain— Close all windows and open the program that you want to use.
In some cases, you might have to restart your computer to restore computer resources. If so, run the program that you want to use first.

Operatingsystemnotfound— Contact Dell (see Contacting Dell).

PleaseConnectUSBKeyboard/MousetoUSBPortsontheBackoftheComputer— Turn your computer off, connect the USB keyboard
and/or mouse to the USB connectors on the back of the computer, and then restart your computer.

PlugandPlayConfigurationError—
1. Turn your computer off, unplug it from the electrical outlet, and then remove all but one of the cards.
2. Plug in your computer and reboot it.
3. If the message reappears, the installed card might be malfunctioning. If the message does not reappear, turn off the computer and
reinsert one of the other cards.
4. Repeat this process until you identify which card is malfunctioning.

Readfault—

Requestedsectornotfound—

Resetfailed—
See Drive Problems.

Sectornotfound— 
l Run the Windows error-checking utility to check the file structure on the floppy disk or hard drive. See Windows Help for instructions.
l If a large number of sectors are defective, back up the data (if possible), and then reformat the floppy disk or hard drive.


Dell Precision 490 Desktop Specifications

General

Brand	Dell
Model	Precision 490 Desktop
Category	Desktop
Language	English