Installing the SSD card
1. Insert the SSD card into the connector.
2. Tighten the screw to secure the SSD card to the system board.
3. Install the:
a. system board shield
b. back cover
c. stand
4. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing the coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. stand
b. back cover
c. system board shield
3. Press the latch to release the coin cell battery and remove it from the computer.
22
Disassembly and reassembly
To Next Page
Loading...
