Delphi Multec 3.5 User Manual

Multec 3.5 Fuel Injector Application Manual Product Handling
Delphi Energy and Chassis Systems
Revision: 11/05-1 6-3
Figure 6-1 Injector Seal Ring Installation Precaution
6.1 Packing Procedures
The Multec 3.5 Fuel Injector is an electrical component and must be
handled with reasonable care to prevent damage. Proper handling starts at
the Delphi manufacturing operation where the packaging methods used
help reduce the risk of damage due to impact, moisture, or contamination.
Note
Typically, injectors are delivered to the engine plant in a rail assembly.
In this case, packaging issues are addressed at the rail assembly level
(See Fuel Rail Assembly Applications Manual).
In cases where the injector is delivered to the customer as a discrete
component, packaging requirements need to be defined early in the
program. Packaging parameters to be considered should include:
• Orientation of the injector in the packaging to facilitate handling
at the customer location
• External dimension requirements of the packaging
• Quantity of injectors per layer, box, skid.
• Expendable or returnable packaging

Delphi Multec 3.5 Specifications

General

Brand	Delphi
Model	Multec 3.5
Category	Laboratory Equipment
Language	English