Delphi Multec 3.5 User Manual

Introduction Multec 3.5 Fuel Injector Application Manual
1-6 Delphi Energy and Chassis Systems
Revision: 11/05-01
1.9.4 Industry Documents
1.9.4.1 SAE Standard Procedure J1832
1.9.4.2 SAE J-2715 (Draft) Gasoline Fuel Injector Spray Measurements and Characterizations
1.9.4.3 ASTM D86, “Standard Test Method for Distillation of Petroleum Products at Atmospheric
Pressure”
1.9.4.4 ASTM D2533, “Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine
Fuels”
1.9.4.5 ASTM D4814, “Standard Specification for Automotive Spark-Ignition Engine Fuel”
1.9.4.6 ASTM D5191, “Standard Test Method for Vapor Pressure of Petroleum Products (Mini
Method)”
1.9.4.7 World Wide Fuel Charter
1.9.4.8 Internal Combustion Engine Fundamentals. John B. Heywood, McGraw-Hill Publishing,
1988.
1.9.5 Useful Web Sites
1.9.5.1 EPA Vehicle Emissions Information:
http://www.epa.gov/ebtpages/airmobilevehicleemissions.html
1.9.5.2 CARB Web Site: http://www.arb.ca.gov/
1.9.5.3 Delphi Corp Web Site:
http://www.delphi.com/

Delphi Multec 3.5 Specifications

General

Brand	Delphi
Model	Multec 3.5
Category	Laboratory Equipment
Language	English