Delphi Multec 3.5 - Component Assembly Best Practices

Appendix Multec 3.5 Fuel Injector Application Manual
10-12
Delphi Energy and Chassis Systems
Revision: 11/05-1
CHARACTERISTIC APPLICATION
MANUAL
SECTION(S)
CAPABILITY/
RECOMMENDATION
VERIFICATION
RESULT
8.4.2
8.4.8
Spray variation acceptable for
application
Velocity
3.8
5.2.5
8.4.8
Velocity and distance correct
for injection timing
Leakage
2.4.2
3.11
7.2
8.4.4
Durability acceptable to
application
(crank vs leak)
(evaporative emissions)
Noise
3.14 Acceptable to application
Injection Method
5.2.1
5.2.1.4.1
Number of durability pulses
acceptable to application
10.4 Component Assembly Best Practices
(See following page)