Delta ASDA-A2 Series User Manual

ASDA-A2 Chapter 4 Panel Display and Operation
4-2 Revision February, 2017
4.2 Parameter Setting Procedure
Switch the mode:
Parameter
Mode
Monitoring
Mode
Alarm Mode
Power On
1. If no alarm occurs, then the Alarm Mode will be skipped.
2. When new alarm occurs, it will switch to Alarm Mode in
any conditions.
3. When switching to the other modes, if there is no Key to
be selected for 20 seconds, it will return to the Alarm Mode
automatically.
Please refer to Chapter 10 for detailed alarm description.
MODE
MODE
MODE
Please refer to Chapter 8 for parameters
Please refer to section 7.2.1
Operate in each mode:
Monitoring mode

Delta ASDA-A2 Series Specifications

General

Enclosure Rating	IP20
Control Mode	Position, Speed, Torque
Communication Interface	RS-485, CANopen
Protection	Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Encoder error
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C to 65°C
Humidity	20% to 90% RH (non-condensing)
Altitude	1000m max
Cooling Method	Natural cooling or forced air cooling
Encoder Feedback	20-bit incremental encoder (standard), 17-bit absolute encoder (optional)