Delta ASDA-A2 Series User Manual

ASDA-A2 Chapter 4 Panel Display and Operation
4-4 Revision February, 2017
Edit Setting Mode
Parameter
Mode
‧‧‧
Editing Setting Mode
Display parameter setting value
Save the parameter
setting value. Then,
returns to Parameter
Mode.
Monitoring /
Alarm Mode
‧‧‧
‧‧‧
MODE SET
SHIFT
SET
SET
SET
MODE
If no alarm occurs, then the Alarm Mode will be skipped.
Save the parameter
setting value. Then,
returns to Parameter
Mode.
Save the parameter
setting value. Then,
returns to Parameter
Mode.
SHIFT

Delta ASDA-A2 Series Specifications

General

Enclosure Rating	IP20
Control Mode	Position, Speed, Torque
Communication Interface	RS-485, CANopen
Protection	Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Encoder error
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C to 65°C
Humidity	20% to 90% RH (non-condensing)
Altitude	1000m max
Cooling Method	Natural cooling or forced air cooling
Encoder Feedback	20-bit incremental encoder (standard), 17-bit absolute encoder (optional)