Delta ASDA-A2 Series User Manual

Chapter 2 Installation ASDA-A2
Revision February, 2017 2-3
Scheme of Installation:
In order to have smaller wind resistance of the fan and increase the ventilation, please follow the
suggested clearance value when installing one or more than one servo drives. (Refer to the
following diagrams)
NOTE
The above diagrams are not in equal proportion. Please refer to the
annotation.

Delta ASDA-A2 Series Specifications

General

Enclosure Rating	IP20
Control Mode	Position, Speed, Torque
Communication Interface	RS-485, CANopen
Protection	Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Encoder error
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C to 65°C
Humidity	20% to 90% RH (non-condensing)
Altitude	1000m max
Cooling Method	Natural cooling or forced air cooling
Encoder Feedback	20-bit incremental encoder (standard), 17-bit absolute encoder (optional)