Chapter 10 Digital KeypadC2000
10-11
bottom left-hand corner of the screen.
Press F4 on the keypad to delete this
parameter from My Mode.
00-10
0
Speed Mode
0~3 DEL
4. After pressing ENTER to delete <01
Control Mode>, the <02 Maximum
Operating Frequency > will automatically
replace <01 Control Mode>.
3. Application Selection List
This function allows user to select application and its parameters sets.
For example:
Select 3: Application Selection List
Press ENTER to go into the Application Selection List
Select Application
Press ENTER to enter the application selection screen, the selected
application set will be “Fan”.
Press ENTER to enter the Fan application set screen.
Press Up/ Down key to select the parameter.
To Next Page
Loading...
