Chapter 3 Featured Function
3-59
Description Factory Default
Enable
Specify whether the SNMP agent is enabled. None
Remote Management
Specify whether remote user can manage DVW series by SNM P. None
Read Community
Input a community name for the device to be accessed with read-only
permission.
Public
Write Community
Input a community name for the device to be accessed with read/write
permission.
Private
SNMP Agent Version
Specify the SNMP version of the device. V1, V2c
Admin Authentication Type
Specify the admin authentication type to verify that the message is from a valid
source. It works when SNMP agent version is “V1, V2c, V3” or “V3”.
No Auth: No Authentication. Only use admin account to access objects.
MD5: Use MD5 algorithms for authentication.
SHA: Use SHA algorithms for authentication.
No Auth
Admin Privacy Type
Specify the data encryption type. It works when SNMP agent version is “V1, Disabled
To Next Page
Loading...