Chapter 3 Featured Function
3-65
Description Factory Default
Mail Server (SMTP)
Set up the IP address or domain address of the syslog server (SMTP) None
User Name / Password
Set up the user name and the password for the syslog server None
From Email Address
Set up the administrator’s email address; once the warning email is sent, this
email address will be shown on the sender’s section. Up to 63 characters can
be inputted.
None
To Email Address 1 / 2 / 3 / 4
Set up the receipt’s email address; up to 63 characters can be inputted. None
3.6.3 Relay Alarm
Relay alarm is used to monitor power, DI and port status and you can configure the alarm events. When the
event has been triggered, the alarm LED will be ON.
3.6.3.1 Relay Event Types
Please check the box to enable the event items you’d like to be notified. The default settings are disabled
(unticked).
Notice:
Please refer to section 3.6.1.1 Syslog Event Types for more information on the event types.
To Next Page
Loading...