DVW Series Industrial IEEE 802.11 a/b/g/n Wireless AP/WDS/Client/Gateway User Manual
3-62
Description Factory Default
Cold Start
Power off and then power on to start the system. Enabled
Warm Start
When the power is still on, restart the system. Enabled
Authentication Failure
Log in failure (wrong ID / Password) Enabled
IP Changed
Change the IP address of the DVW series. Enabled
Password Changed
Change the login password. Enabled
Ｄot1d Bridge New Root
Set up a new root. Enabled
Ｄot1dBridge Topology Changed
When error occurred in the bridge root or when it is powered off. The backup
bridge root can be the bridge root of the appointed topology.
Enabled
Configuration Changed
Any configuration of the DVW series changed. Enabled
WLAN Connection or Disconnection
When in the Client mode, any wireless device joined or left. Enabled
WLAN Role Change
Operation mode or configuration changed Enabled
WLAN Client Joined / Left
When in the Client mode, any client end joined or left. Enabled
Firmware Update
When updating firmware Enabled
DI (ON→OFF) or (OFF→ON)
Trigger DI to (ON→OFF) or (OFF→ON) Enabled
Power 1/2 (ON→OFF) or (OFF→ON)
Input power 1 / 2 (ON→OFF) or (OFF→ON) Enabled
Port Link 1/2 (ON→OFF) or (OFF→ON)
To Next Page
Loading...