Denon AVR-E400 Service Manual

2. PANEL/REMOTE LOCK Selection mode
2.1. Behaviorspecications
In this mode, you can switch between the PANEL LOCK MODE and the Mode for preventing remote control acceptance.
2.2. Starting up
Press the "Power operation (
X
)" button to turn on power while pressing the "ZONE2 SOURCE" and "TUNER PRESET
CH +" buttons.
Press the "TUNER PRESET CH +" button ("SOURCE SELECT
1
" button for AVR-E400) to select the mode and the
"STATUS" button to conrm the selection.
2.3. Mode selection method and how each mode is displayed
Each time you press the "TUNER PRESET CH +" ("SOURCE SELECT
1
" button for AVR-E400) button, the mode
displayed on the FL DISPLAY changes.
While the desired mode name is displayed on the FL DISPLAY, press the "STATUS" button. The set is restarted and the
selected mode takes effect.
The currently set item is marked with "
b
".
q
FLD
F P / V O L L O C K O n
Operations using the main unit panel buttons and the master
volume knob are rejected.
w
FLD
F P L O C K O n
Operations using the main unit panel buttons are rejected.
e
FLD
F P L O C K * O f f
Panel lock mode is cancelled.
r
FLD
R C L O C K O n
Operations using the remote control are rejected.
t
FLD
R C L O C K * O f f
RC lock mode is cancelled.
28

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones