EasyManuals Logo

Denon AVR-E400 Service Manual

Denon AVR-E400
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
n
Audio section
• Power amplifier
Rated output(for E400 model):
Front:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Rated output(for X2000 model):
Front:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
90 W + 90 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
125 W + 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
6 – 16 Ω/ohms
• Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N :
100 dB (IHF–A weighted, DIRECT mode)
n
Tuner section
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
Receiving Range:
FM 87.5 MHz – 107.9 MHz(for E400 model)
AM 520 kHz – 1710 kHz(for E400 model)
FM 87.50 MHz – 108.00 MHz(for X2000 model)
AM 522 kHz – 1611 kHz(for X2000 model)
Usable Sensitivity:
FM 1.2 μV (12.8 dBf)
AM 18 μV
50 dB Quieting
Sensitivity:
MONO 2.8 μV (20.2 dBf)
S/N :
MONO 70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic
Distortion:
MONO 0.7 % (1 kHz)
STEREO 1.0 % (1 kHz)
n
General
Power supply:
AC 120 V, 60 Hz
AC 230 V, 50/60 Hz
Power consumption:
460 W
Power consumption in standby mode:
0.1 W
Power consumption in CEC standby mode:
0.5 W
Power consumption in network standby mode:
2.7 W
TECHNICAL SPECIFICATIONS
9

Table of Contents

Other manuals for Denon AVR-E400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-E400 and is the answer not in the manual?

Denon AVR-E400 Specifications

General IconGeneral
HDMI Inputs6
HDMI Outputs1
3D Pass-throughYes
4K Pass-throughYes
Dolby TrueHDYes
DTS-HD Master AudioYes
Audyssey MultEQYes
Network ConnectivityYes
AirPlayYes
DLNAYes
Input Impedance47 kOhms
Input Sensitivity200 mV
Signal-To-Noise Ratio100 dB
Response Bandwidth10 Hz - 100 kHz
THD0.08%
Tuner Presets56
Tuner BandsAM/FM
Frequency Response10 Hz - 100 kHz
Video UpscalingYes
BluetoothNo
Wi-FiNo
Surround Sound EffectsDTS Neo:6
Audio D/A Converter192kHz/24-bit
InputsHDMI, Digital Optical, Digital Coaxial, Analog
OutputsHDMI, Headphones

Related product manuals