EasyManuals Logo

Denon AVR-E400 Service Manual

Denon AVR-E400
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #59 background imageLoading...
Page #59 background image
2. How to update by DPMS
You can update the rmware by downloading the latest version from the Internet.
2.1. Connecting to the Network
(1) System requirements
Internet Connection by Broadband Circuit
Modem
Router
Ethernet cable (CAT-5 or greater recommended)
(2) Setting
2.2. Checkingandupdatingthermware
Check if the latest rmware exists. You can also check approximately time required to complete an update.
(1) Press the "SETUP" button on the remote control to display the GUI menu.
(2) Use the cursor buttons to select "General" → "Firmware" → "Update" → "Check for Update".
(3) Press the "ENTER" button.
The latest version of the rmware on the website is displayed.
If the rmware on the website is latest, proceed to (4).
If the latest rmware has been already installed, press the "SETUP" button to close the menu.
(4) Use the cursor buttons to select "Start", then press the "ENTER" button.
During update, the power indicator lights in red and the GUI screen disappears. And an approximately remaining
time is indicated on the display.
When updating is complete the power indicator lights in green and normal status is resumed.
--- Cautions on Firmware Update ---
In order to update the rmware, you must have the correct system requirements and settings for a broadband Internet
connection.
Do not turn off the power until updating is completed.
Even with a broadband connection to the Internet, approximately 1 hour is required for the updating procedure to be
completed.
Once updating starts, normal operations on the this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down the settings before updating, and set them again after updating.
Modem
Internet
Computer
LAN port/
Ethernet
connector
ETHERNET
connector
Router
To WAN port
To LAN port
To LAN port
59

Table of Contents

Other manuals for Denon AVR-E400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-E400 and is the answer not in the manual?

Denon AVR-E400 Specifications

General IconGeneral
HDMI Inputs6
HDMI Outputs1
3D Pass-throughYes
4K Pass-throughYes
Dolby TrueHDYes
DTS-HD Master AudioYes
Audyssey MultEQYes
Network ConnectivityYes
AirPlayYes
DLNAYes
Input Impedance47 kOhms
Input Sensitivity200 mV
Signal-To-Noise Ratio100 dB
Response Bandwidth10 Hz - 100 kHz
THD0.08%
Tuner Presets56
Tuner BandsAM/FM
Frequency Response10 Hz - 100 kHz
Video UpscalingYes
BluetoothNo
Wi-FiNo
Surround Sound EffectsDTS Neo:6
Audio D/A Converter192kHz/24-bit
InputsHDMI, Digital Optical, Digital Coaxial, Analog
OutputsHDMI, Headphones

Related product manuals