Denon AVR-E400 Service Manual

3.7. Operation Info mode
3.7.1.Specications
This mode displays the accumulated operating time, power on count, counts for each protection on the set.
3.7.2. About the display on the FL display
When the set has started in the Operation Info mode, press the "STATUS" button to display information in the following
order.
(a) Accumulated operating time
FLD
O P T i m e H
↑ Time display
"STATUS"
(b) Power on count
FLD
P . O n T i m e
↑Count display
"STATUS"
(c) DC /ASO Protection count
FLD
D C : / A S O :
"STATUS"
(d) Thermal Protection count
FLD
T H M A : / B
"STATUS"
(Returns to normal display)
48

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones